Equipment Parameters
序号 | 项目 | 内容 | 参数值 | 单位 |
1 | 机床参数 | 总占地面积(含水箱) | 2850*2950*2800 | mm |
2 | X轴加工行程 | 4*430 | mm |
3 | Y轴加工行程 | 4*700 | mm |
4 | Z轴加工行程 | 4*450 | mm |
5 | 主轴间距 | 450 | mm |
6 | 工作台尺寸 | 430*700 | mm |
7 | 装夹高度(主轴鼻端到工作台) | 250~700 | mm |
8 | 电源及总功率 | AC380/100 | V/KW |
9 | 整机重量 | 9500 | Kg |
10 | 精度参数 | XY平面圆度 | 0.01/Φ200 | mm/mm |
11 | 定位精度 | X/Y/Z=0.008/0.008/0.006 | mm |
12 | 重复定位精度 | X/Y/Z=0.005/0.005/0.005 | mm |
13 | 系统分辨率 | 0.0001 | mm |
14 | 运动参数 | 运动控制轴数 | 32 | 个 |
15 | 轴最大加速度 | 5000 | mm/s^2 |
16 | 最高进给速度 | 24000 | mm/min |
17 | 最高空走速度 | X/Y/Z=30000/30000/30000 | mm/min |
18 | 主轴参数 | 主轴电机数 | 4 | 个 |
19 | 功率 | 11 | KW |
20 | 机械直联主轴 | Φ150 | mm |
21 | 最高转速 | 12000 | rpm |
22 | 主轴电机额定扭矩 | 47.8~71.7 | Nm |
23 | 刀柄形式 | BBT40 | |
24 | 中心出水压力（外置环喷） | 7 | Mpa |
25 | 对刀精度 | 0.01 | Mm |
24 | 刀库参数 | 换刀时间 | 7 | s |
25 | 刀库容纳刀具数量 | 4*39 | 把 |
26 | 外部参数 | 环境温度 | 20~30 | ℃ |
27 | 气源气压 | 0.6~0.8 | Mpa |
28 | 气源流量 | 800 | L/min |
29 | 真空负压 | -0.06~-0.08 | Mpa |
30 | 测头（选配） | 重复定位精度 | 0.006 | mm |
31 | B轴（选配） | 四轴重复精度 | 10 | arcsec |
32 | 四轴分割精度 | 30 | arcsec |
33 | 中心高 | 135+115 | mm |
Application Cases
-
-
- liquid cooling plate
-
-
- liquid cooling plate
-
-
- Unmanned aircraft body
- Material: Titanium alloy, size: 15 * 5cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, surface
Roughness Ra ≤ 1.6 μ m
-
-
- Drone rack pivot fasteners
- Material: stainless steel, size: 2 * 1cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, surface
Roughness Ra ≤ 0.1 μ m
-
-
- Robot shell components
- Material: S136 steel, size: 20X15cm, highlights: 1. Clear edge position; 2. The luster is average without any color deviation, and the consistency of the blade pattern is good.
-
-
- Humanoid robot
-
-
- Humanoid robot
-
-
- drone
-
-
- drone
-
-
- Drone remote control joystick
- Material: Aluminum alloy, size: 5 * 5 * 1cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, consistent cutting pattern, surface
Roughness Ra ≤ 0.2 μ m
-
-
- GPU heatsink
-
-
- Semiconductor water cooling
-
-
- Material: Aluminum alloy, size: 8 * 8 * 2.5cm, highlights: 1. Dimensional accuracy within ± 0.005mm; 2. Precise machining dimensions, uniform overall cutting pattern
-
-
- GPU water cooling board
- Material: Purple copper, size: 9.3 * 8.35 * 2.83cm, highlights: 1. Dimensional accuracy within ± 0.005mm; 2. Clear sharpness, no burrs, high consistency of grooves.
-
-
- GPU water-cooled heat sink
- Material: Purple copper, size: 5 * 5 * 1cm, highlights: 1. Dimensional accuracy is ± 0.005mm; 2. Sharp and clear, without thorns, with high consistency in texture.
-
-
- Precision mold
-
-
- Plastic mold
-
-
- Protective gear lining
- Material: steel, size: 350 × 350 mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Clear sharpness, no burrs, high consistency of grooves.
-
-
- Injection mold
- Material: stainless steel, size: 170 × 130 × 90mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Average gloss without color deviation, good consistency of cutting pattern.
-
-
- Plastic injection mold
- Material: 45 # steel, size: 300 × 350 mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Good processing consistency, high smoothness
