Equipment Parameters
序号 | 项目 | 内容 | 参数值 | 单位 |
1 | 机床参数 | 总占地面积 | 2630*2621*2240 | mm |
2 | X1/X2轴加工行程 | 4*168 | mm |
3 | Y1/Y2轴加工行程 | 450 | mm |
4 | Z1~8轴加工行程 | 170 | mm |
5 | 工作台尺寸 | 680*450 | mm |
6 | 装夹高度 | 110 | mm |
7 | 电源及总功率 | AC220/26 | V/KW |
8 | 整机重量 | 5500 | Kg |
9 | 精度参数 | XY平面圆度 | 0.012/Φ200 | mm/mm |
10 | 定位精度 | X/Y/Z=0.01/0.01/0.08 | mm |
11 | 重复定位精度 | X/Y/Z=0.006/0.006/0.005 | mm |
12 | 系统分辨率 | 0.0005 | mm |
13 | 运动参数 | 运动控制轴数 | 14 | 个 |
14 | 轴最大加速度 | 5000 | mm/s^2 |
15 | 最高进给速度 | 12000 | mm/min |
16 | 最高空走速度 | X/Y/Z=26000/26000/18000 | mm/min |
17 | 主轴参数 | 电主轴数 | 8 | 个 |
18 | 功率 | 2.5 | KW |
19 | 最高转速 | 60000 | rpm/min |
20 | 主轴额定扭矩 | 0.32 | Nm |
21 | 刀柄形式 | T10-ER11 | |
22 | 对刀精度 | 0.01 | mm |
23 | 外部参数 | 环境温度 | 20~30 | ℃ |
24 | 气源气压 | 0.6~0.8 | Mpa |
25 | 气源流量 | 500 | L/min |
26 | 真空负压 | -0.06~-0.08 | Mpa |
27 | 其它 | 电控箱位置 | 机床后侧 | |
28 | 刀库容纳刀具数量 | 8*16把（共128把） | 把 |
Application Cases
-
-
- liquid cooling plate
-
-
- liquid cooling plate
-
-
- Unmanned aircraft body
- Material: Titanium alloy, size: 15 * 5cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, surface
Roughness Ra ≤ 1.6 μ m
-
-
- Drone rack pivot fasteners
- Material: stainless steel, size: 2 * 1cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, surface
Roughness Ra ≤ 0.1 μ m
-
-
- Robot shell components
- Material: S136 steel, size: 20X15cm, highlights: 1. Clear edge position; 2. The luster is average without any color deviation, and the consistency of the blade pattern is good.
-
-
- Humanoid robot
-
-
- Humanoid robot
-
-
- drone
-
-
- drone
-
-
- Drone remote control joystick
- Material: Aluminum alloy, size: 5 * 5 * 1cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, consistent cutting pattern, surface
Roughness Ra ≤ 0.2 μ m
-
-
- GPU heatsink
-
-
- Semiconductor water cooling
-
-
- Material: Aluminum alloy, size: 8 * 8 * 2.5cm, highlights: 1. Dimensional accuracy within ± 0.005mm; 2. Precise machining dimensions, uniform overall cutting pattern
-
-
- GPU water cooling board
- Material: Purple copper, size: 9.3 * 8.35 * 2.83cm, highlights: 1. Dimensional accuracy within ± 0.005mm; 2. Clear sharpness, no burrs, high consistency of grooves.
-
-
- GPU water-cooled heat sink
- Material: Purple copper, size: 5 * 5 * 1cm, highlights: 1. Dimensional accuracy is ± 0.005mm; 2. Sharp and clear, without thorns, with high consistency in texture.
-
-
- Precision mold
-
-
- Plastic mold
-
-
- Protective gear lining
- Material: steel, size: 350 × 350 mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Clear sharpness, no burrs, high consistency of grooves.
-
-
- Injection mold
- Material: stainless steel, size: 170 × 130 × 90mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Average gloss without color deviation, good consistency of cutting pattern.
-
-
- Plastic injection mold
- Material: 45 # steel, size: 300 × 350 mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Good processing consistency, high smoothness
