Equipment Parameters
序号 | 项目 | 内容 | 参数值 | 单位 |
1. | 机床参数 | 总占地面积（含水箱） | 2040*2456*2364 | mm |
2. | X轴加工行程 | 2*370 | mm |
3. | Y轴加工行程 | 2*500 | mm |
4. | Z轴加工行程 | 2*195 | mm |
5. | 工作台尺寸 | 400*500 | mm |
6. | 装夹高度(刀柄鼻端到工作台) | 141~336 | mm |
7. | 电源及总功率 | AC380/27 | V/KW |
8. | 整机重量 | 3000 | Kg |
9. | 精度参数 | XY平面圆度 | 0.010/Φ200 | mm/mm |
10. | 定位精度 | X/Y/Z=0.008/0.008/0.008 | mm |
11. | 重复定位精度 | X/Y/Z=0.005/0.005/0.005 | mm |
12. | 系统分辨率 | 0.0005 | mm |
13. | 运动参数 | 运动控制轴数 | 8 | 个 |
14. | 轴最大加速度 | 3000 | mm/s^2 |
15. | 最高进给速度 | 12000 | mm/min |
16. | 最高空走速度 | X/Y/Z=30000/30000/15000 | mm/min |
17. | 主轴参数 | 电主轴数 | 2 | 个 |
18. | 功率 | 4 | KW |
19. | 主轴直径 | Φ80 | mm |
20. | 最高转速 | 40000 | rpm/min |
21. | 刀具偏摆 | ≤0.01 | mm |
22. | 刀柄形式 | ISO20 | |
23. | 对刀精度 | 0.01 | mm |
24. | 刀库参数 | 换刀时间 | 7 | s |
25. | 刀库容纳刀具数量 | 2*25=50 | 把 |
26. | 外部参数 | 环境温度 | 20~30 | ℃ |
27. | 气源气压 | 0.6~0.8 | Mpa |
28. | 气源流量 | 500 | L/min |
29. | 真空负压 | -0.06~-0.08 | Mpa |
30. | 测头
(选配) | 测头行程 | 150 | mm |
31. | 重复定位精度 | 0.01 | mm |
32. | 四轴
(选配) | 四轴分割精度 | 20 | sec |
33. | 四轴重复精度 | 4 | sec |
Application Cases
-
-
- liquid cooling plate
-
-
- liquid cooling plate
-
-
- Unmanned aircraft body
- Material: Titanium alloy, size: 15 * 5cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, surface
Roughness Ra ≤ 1.6 μ m
-
-
- Drone rack pivot fasteners
- Material: stainless steel, size: 2 * 1cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, surface
Roughness Ra ≤ 0.1 μ m
-
-
- Robot shell components
- Material: S136 steel, size: 20X15cm, highlights: 1. Clear edge position; 2. The luster is average without any color deviation, and the consistency of the blade pattern is good.
-
-
- Humanoid robot
-
-
- Humanoid robot
-
-
- drone
-
-
- drone
-
-
- Drone remote control joystick
- Material: Aluminum alloy, size: 5 * 5 * 1cm Highlights: 1. Dimensional accuracy ± 0.01mm; 2. High smoothness, consistent cutting pattern, surface
Roughness Ra ≤ 0.2 μ m
-
-
- GPU heatsink
-
-
- Semiconductor water cooling
-
-
- Material: Aluminum alloy, size: 8 * 8 * 2.5cm, highlights: 1. Dimensional accuracy within ± 0.005mm; 2. Precise machining dimensions, uniform overall cutting pattern
-
-
- GPU water cooling board
- Material: Purple copper, size: 9.3 * 8.35 * 2.83cm, highlights: 1. Dimensional accuracy within ± 0.005mm; 2. Clear sharpness, no burrs, high consistency of grooves.
-
-
- GPU water-cooled heat sink
- Material: Purple copper, size: 5 * 5 * 1cm, highlights: 1. Dimensional accuracy is ± 0.005mm; 2. Sharp and clear, without thorns, with high consistency in texture.
-
-
- Precision mold
-
-
- Plastic mold
-
-
- Protective gear lining
- Material: steel, size: 350 × 350 mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Clear sharpness, no burrs, high consistency of grooves.
-
-
- Injection mold
- Material: stainless steel, size: 170 × 130 × 90mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Average gloss without color deviation, good consistency of cutting pattern.
-
-
- Plastic injection mold
- Material: 45 # steel, size: 300 × 350 mm, highlights: 1. Processing accuracy ± 0.01mm; 2. Good processing consistency, high smoothness
